Home / Applications

Plywood

Plywood is made of three or more layers veneer materials,rotary-cutted or sliced from wood,which normally in odd number veneer layers,sticked by glue,and the adgacent veneer fiber direction perpendicular to each other.
Plywood used for interior decoration,room furniture,packing decorate,etc.
WBP plywood used for exterior construction.

Film Faced Plywood

Film Faced Plywood is an exterior plywood used in building and construction projects. It has special film coating on surface made with phenol or melamine glue, which gives the plywood higher resistance to moisture, abrasion, chemical degradation and fungal attack compared to ordinary plywood.
1. The high-strength plywood is an ideal material for formwork.
2. It performs longer in both humid and wet conditions and resists delaminating.
3. Weight less than steel plate, easy to model as requested.
4. Recycling to use many times.

MDF

Medium-density fibreboard (MDF) is an engineered wood product made by breaking down hardwood or softwood residuals into wood fibres, often in a defibrator, combining it with wax and a resin binder, and forming panels by applying high temperature and pressure.
1. Cheaper than plywood. It is made up of separated fibres, but can be used as a building material similar in application to plywood. 
2. It is stronger and much denser than particle board.
3. Making it more uniform than natural woods during cutting and in service.
4. Excellent substrate for veneers.

Laminated Board

Laminated board is combined by base materials (MDF, Particle board, Plywood, etc), with melamine paper, natural veneer or engineered veneer, etc.
Laminated board used for interior decoration, room furniture, packing decorate, etc.

Slot MDF

Slot MDF panels is widely used in supermarkets, shops, showrooms as shelves to hang and display small commodities. With good properties, such as easy fabricability, anti-static, easy cleaning, long-lasting and no seasonal effect.

Particle Board (Chipboard)

Particle board, also known as particle board and chipboard, is an engineered wood product manufactured from wood chips, sawmill shavings, or even sawdust, and a synthetic resin or other suitable binder, which is pressed and extruded.
1. Cheaper, denser and more uniform than conventional wood and plywood and is substituted for them when cost is more important than strength and appearance.
2. More attractive by painting or the use of wood veneers onto surfaces that will be visible.

OSB

Oriented strand board (OSB), also known as flakeboard, is a type of engineered lumber similar to particle board, formed by oil removing, drying, adding adhesives and then compressing layers of wood strands (flakes) in specific orientations. 
1. OSB panels have no internal gaps or voids, and are water-resistant.
2. The finished product has properties similar to plywood, but is uniform and cheaper.
3. OSB has a greater load-bearing capacity than milled wood panels.

Ball Bearing Slide

It is divided into two or three fold. Widely used for wooden and steel drawers, and other cabinet.

Hinge

Hinge is mechanical bearing that connects two solid objects, typically allowing only a limited angle.

PVC Edge Banding

PVC edge banding is made from PVC, extrusion products edge banding also can be made by ABS and Melamine, Acrylic, PE material. PVC edge banding's width ranges is from15mm to 650mm, thickness ranges is from 0.2mm to 3mm.
PVC edge banding possess the characteristics of smooth and glossy surface appearance slight depigmentation, excellent flexibility, excellent bend.
It can be used for furniture, cabinet and equipment of schools, offices and laboratories.
Melamine edge banding is made of German raw paper and the plastic resin.
1. Finish coating is already applied on the surface of the edge banding.
2. Edge banding can be produced with hot melt glue for easy manual operation, 0.2mm and
    0.3mm without gule.
3. Shall be placed in a cool and dry place area.
4. Keep the room temperature between 20-25°C.
5. The best humidity is: 50-60%.
We can design the colors matching and texture according to your specific inquiry, also we can book cartons according to your company logo and so on.

FRENDLY LINK:     EONCRED GROUP    EONCRED HARDWARE   EONCRED LINYI

Quick Links

Contact Us

ADD:17th Floor Yuheng Tower No. 170 Xuzhou North Road,Qingdao,266000,China
TEL:+86-13863993399
E-MAIL:eoncred@eoncredgroup.com 
WHATSAPP:+86-13863993399
WeChat:Eoncred
TEL:+86-532 66006031/32/33 & 85666955/66
 

Send Message
Copyright © 2019 EONCRED GROUP All right resolved.