Plywood is made of three or more layers veneer materials

Plywood is made of three or more layers veneer materials,rotary-cutted or sliced from wood ,which normally in odd number veneer layers ,sticked by glue ,and the adjacent veneer fiber direction perpendicular to each other. The advantage of this product is first and foremost. plywood used to interior decoration,room furniture ,packing decorate,ect. Also, WBP plywood used for exterior construction. The most common faces and bottoms of plywood are okoume, bintangor and poplar ect. The size that the customer often asks is 1220*2440mm,1250*2500mm.

Process:

① planking. The core board is manually laid in the order of one layer of glued and one layer without glue and the fiber directions are perpendicular to each other, and the plywood is laid together.②cold-pressing，Machine pressure is used to shape the plywood to allow the glue to work. ③Deal-surface Repair small holes in plywood with small core boards ④ laminated Place the surface on top of the core board and the bottom ⑤Hot-pressing Put the surface, core board and bottom into the hot press together, and make the glue work under the effect of temperature ⑥Sawing plywood ⑦ QC Quality inspection of plywood ⑧packing， Packing plywood

Film faced plywood is an exterior  plywood used in building and plywood used in building and construction projects . lt has special film coating on surface made with phenol or melamine glue,which gives the playwood higher resistance to misture ,abrasion degradation and fungal attack compared to ordinary plywood.This product has the high-strength plywood is an ideal material for formwork and it can recycle to use many times.The size that the customer often asks is 1220*2440mm,1250*2500mm.

Process:

① planking；The core board is manually laid in the order of one layer of glued and one layer without glue and the fiber directions are perpendicular to each other, and the film faced plywood is laid together ②prepressing，Machine pressure is used to shape the plywood to allow the glue to work.③deal -surface Repair small holes in plywood with small core boards ④laminated Attach the corresponding membrane paper to the upper and lower sides of the film faced plywood ⑤Hot-pressing The film faced plywood covered with film paper is fed into the hot press together ⑥Sawing film faced plywood ⑦Grade the film faced plywood ⑧Painting the film faced plywood ⑨packing plywood

The same thing about plywood and film faced plywood is that the core board is the same,The difference is that the surface and the bottom are different, and the production process is differe。Use is also different, plywood is mainly used for furniture decoration, packaging, home However, film faced plywood are mainly used for buildings and building materials