Home / Products / Plywood / Commercial Plywood / Plywood Making Equipment Is Used for High Quality Plywood
English
 |
| Quantity: | |
|---|---|
Eoncred
| Plywood Making Equipment Is Used for High Quality Plywood | |
1.Planking→ 2.Molding→ 3.Prepressing→ 4. Hot-pressing→ 5.Deal Surface →6.Sanding→ 7.Veneering→ 8.Hot-pressing→ 9.Sawing→ 10. Polishing→ 11.Checking→ 12.Outer Package
▼PACKING&SHIPPING
▼OUR COMPANY
Linyi YIRUIDE Wood Co., Ltd, is a subsidiary of Eoncred Group, established in 1995, located in China’s largest wooden products manufacture base - Linyi city, have 3 factories, totally covered an area of 20000 square meters, with more than 200 employees.
Company focus on the production of Plywood, Film Faced Plywood, Fancy Plywood.
After decades of developing and upgrading, with high products quality and reasonable prices, the products sell well in more than 60 countries and regions, such as the Middle-East, Southeast Asia, South Asia, Europe, U.S.A, Africa, etc. Win the customer's wide welcome and trust.
The company has a high-quality QC team, in a rigorous, serious and responsible attitude, check the quality and ensure that each sheet is qualified.
We will serve you with the greatest enthusiasm, the most professional attitude, give you the most satisfied customer experience.
We are expecting to establish the mutual benefit business relationship with you.
Plywood is made of three or more thin layers of wood bonded together with an adhesive. Each layer of wood, or ply, is usually oriented with its grain running at right angles to the adjacent layer in order to reduce the shrinkage and improve the strength of the finished piece. Most plywood is pressed into large, flat sheets used in building construction. Other plywood pieces may be formed into simple or compound curves for use in furniture, boats, and aircraft.
The use of thin layers of wood as a means of construction dates to approximately 1500 B.C. when Egyptian craftsmen bonded thin pieces of dark ebony wood to the exterior of a cedar casket found in the tomb of King Tut-Ankh-Amon. This technique was later used by the Greeks and Romans to produce fine furniture and other decorative objects. In the 1600s, the art of decorating furniture with thin pieces of wood became known as veneering, and the pieces themselves became known as veneers.
Until the late 1700s, the pieces of veneer were cut entirely by hand. In 1797, Englishman Sir Samuel Bentham applied for patents covering several machines to produce veneers. In his patent applications, he described the concept of laminating several layers of veneer with glue to form a thicker piece—the first description of what we now call plywood.
Despite this development, it took almost another hundred years before laminated veneers found any commercial uses outside of the furniture industry. In about 1890, laminated woods were first used to build doors. As the demand grew, several companies began producing sheets of multiple-ply laminated wood, not only for doors, but also for use in railroad cars, busses, and airplanes. Despite this increased usage, the concept of using "pasted woods," as some craftsmen sarcastically called them, generated a negative image for the product. To counter this image, the laminated wood manufacturers met and finally settled on the term "plywood" to describe the new material.
In 1928, the first standard-sized 4 ft by 8 ft (1.2 m by 2.4 m) plywood sheets were introduced in the United States for use as a general building material. In the following decades, improved adhesives and new methods of production allowed plywood to be used for a wide variety of applications. Today, plywood has replaced cut lumber for many construction purposes, and plywood manufacturing has become a multi-billion dollar, worldwide industry.
1. To ensure the products to meet the quality standards
2. To ensure the goods to be inspected piece by peice and delivered on time.
3. To provide warm and friendly service and after-sales service.
4. To reply you within 4 hours at the latest.
5. To guarantee the reliable quality and professional service,you will find that importing directly from us Eoncred is so easy and simple as you buy from local supplier.
▼FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shipment / balance paid against receipt copy of B/L.
L/C
If you have another question, pls feel free to contact us as below:
| Plywood Making Equipment Is Used for High Quality Plywood | |
1.Planking→ 2.Molding→ 3.Prepressing→ 4. Hot-pressing→ 5.Deal Surface →6.Sanding→ 7.Veneering→ 8.Hot-pressing→ 9.Sawing→ 10. Polishing→ 11.Checking→ 12.Outer Package
▼PACKING&SHIPPING
▼OUR COMPANY
Linyi YIRUIDE Wood Co., Ltd, is a subsidiary of Eoncred Group, established in 1995, located in China’s largest wooden products manufacture base - Linyi city, have 3 factories, totally covered an area of 20000 square meters, with more than 200 employees.
Company focus on the production of Plywood, Film Faced Plywood, Fancy Plywood.
After decades of developing and upgrading, with high products quality and reasonable prices, the products sell well in more than 60 countries and regions, such as the Middle-East, Southeast Asia, South Asia, Europe, U.S.A, Africa, etc. Win the customer's wide welcome and trust.
The company has a high-quality QC team, in a rigorous, serious and responsible attitude, check the quality and ensure that each sheet is qualified.
We will serve you with the greatest enthusiasm, the most professional attitude, give you the most satisfied customer experience.
We are expecting to establish the mutual benefit business relationship with you.
Plywood is made of three or more thin layers of wood bonded together with an adhesive. Each layer of wood, or ply, is usually oriented with its grain running at right angles to the adjacent layer in order to reduce the shrinkage and improve the strength of the finished piece. Most plywood is pressed into large, flat sheets used in building construction. Other plywood pieces may be formed into simple or compound curves for use in furniture, boats, and aircraft.
The use of thin layers of wood as a means of construction dates to approximately 1500 B.C. when Egyptian craftsmen bonded thin pieces of dark ebony wood to the exterior of a cedar casket found in the tomb of King Tut-Ankh-Amon. This technique was later used by the Greeks and Romans to produce fine furniture and other decorative objects. In the 1600s, the art of decorating furniture with thin pieces of wood became known as veneering, and the pieces themselves became known as veneers.
Until the late 1700s, the pieces of veneer were cut entirely by hand. In 1797, Englishman Sir Samuel Bentham applied for patents covering several machines to produce veneers. In his patent applications, he described the concept of laminating several layers of veneer with glue to form a thicker piece—the first description of what we now call plywood.
Despite this development, it took almost another hundred years before laminated veneers found any commercial uses outside of the furniture industry. In about 1890, laminated woods were first used to build doors. As the demand grew, several companies began producing sheets of multiple-ply laminated wood, not only for doors, but also for use in railroad cars, busses, and airplanes. Despite this increased usage, the concept of using "pasted woods," as some craftsmen sarcastically called them, generated a negative image for the product. To counter this image, the laminated wood manufacturers met and finally settled on the term "plywood" to describe the new material.
In 1928, the first standard-sized 4 ft by 8 ft (1.2 m by 2.4 m) plywood sheets were introduced in the United States for use as a general building material. In the following decades, improved adhesives and new methods of production allowed plywood to be used for a wide variety of applications. Today, plywood has replaced cut lumber for many construction purposes, and plywood manufacturing has become a multi-billion dollar, worldwide industry.
1. To ensure the products to meet the quality standards
2. To ensure the goods to be inspected piece by peice and delivered on time.
3. To provide warm and friendly service and after-sales service.
4. To reply you within 4 hours at the latest.
5. To guarantee the reliable quality and professional service,you will find that importing directly from us Eoncred is so easy and simple as you buy from local supplier.
▼FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shipment / balance paid against receipt copy of B/L.
L/C
If you have another question, pls feel free to contact us as below:
