English
Views: 21 Author: Site Editor Publish Time: 2019-08-14 Origin: Site
In order to make the laminated plywood more beautiful, we may need to know how to paint him. You can color your Laminated MDF and Laminated particle board to suit your style.
Preparation before painting
Steps to paint
Old paint
l Heavy sandpaper
l Sanding machine (optional)
l Safety gear
l Primer
l Drawing
l Paint brush or paint roller
l Clean cloth
l Solvent
The most important thing to note is that you must wear a protective mask and goggles before sanding to ensure that you do not inhale wood chips or have dust in your eyes. Before painting, you must sand the surface of the laminated plywood. Remove dust and debris from the board and sand with a rough sandpaper. You can use a sander or a simple sandpaper. Then, wipe the surface with a clean cloth. The surface is finely ground with fine sandpaper.
Wipe the laminated plywood with a damp cloth. Be sure to remove all dust particles and allow the board to dry. This is more conducive to subsequent use.
Although detonation is not always necessary before painting wood, laminated plywood must be painted first because the surface of the board is highly absorbent. The primer will saturate the laminated plywood, making the painted surface more durable and bonded. You can buy pre-launched laminated plywood, but they are more expensive. Depending on the type of paint you choose, choose from oil-based or acrylic-based primers and then apply a primer with a paint brush. If the surface is large, a paint roller can be used.
After the primer has dried, the plate is polished with 220 grit paper. Then apply a primer and let it dry.
Apply a thin layer of paint to the board with a brush. Let the boards dry and then gently sand them. Then, apply a layer of paint. Allow to dry before touching or using laminated plywood for another project.
When you keep the brushes clean for the next time, clean them and let them dry. If you use oil-based paint, use a solvent to clean the paint brush. If you paint with water, you can wash the brush with soap and water.
Maybe you have used laminated plywood for a while, but you want to make it look more beautiful, you can take it off and paint it, which is the same effect.
First remove the laminated plywood with a screwdriver to work more efficiently. If there is some decoration on the laminated plywood, you can also remove the decoration first to better paint for him.
laminated plywood needs to remove surface dust and then wipe it with a damp cloth or a soft sponge. Make sure that the laminated plywood should be dry before you continue working. Then use rough grit sandpaper and sander to remove the old paint. If there are holes in the laminated plywood, add them with wood putty. Before the compound begins to harden, the putty is inserted into the hole with a putty knife and leveled with a putty knife. Most wood putty products harden in 20 minutes. Allow the putty to dry completely for up to 12 hours.
Use rough sandpaper again after finishing the previous work to eliminate any excess wood putty and even the primer on the surface. Apply the first primer, completely dry, sand with sandpaper, and apply a second primer. Usually, two layers of primer are sufficient for the laminated plywood. The final primer after the primer is completely dry. Start with a top corner and apply the first layer of paint. Use a smaller paint roller if you want to avoid visible brush strokes. Use a small brush to cover areas that you can't reach with the roller. Let the laminated plywood dry overnight. After the paint is completely dry, use a screwdriver to reinstall the laminated plywood.
After painting, look at your laminated plywood, is it more integrated with your style? You can also freely combine various paint methods.
