Home / Products / Film Faced Plywood / Black Film Faced Plywood / High Quality Finger Joint Core Structural Film Faced Plywood
English
 |
| Quantity: | |
|---|---|
EoncredGroup
| High Quality Finger Joint Core Structural Film Faced Plywood | |
▼OUR PRODUCT
1. Planking → 2. Molding → 3. Prepressing → 4. Hot-pressing → 5. Deal Surface → 6. Sanding → 7. Laminated with Hot-pressing → 8. Sawing → 9. Checking (one by one) → 10. Printing (waterproof edge) → 11. Inter package →12. Outer package
▼OUR COMPANY
Linyi YIRUIDE Wood Co., Ltd, is a subsidiary of Eoncred Group, established in 1995, located in China’s largest wooden products manufacture base - Linyi city, have 3 factories, totally covered an area of 20000 square meters, with more than 200 employees.
Company focus on the production of Plywood, Film Faced Plywood, Fancy Plywood.
After decades of developing and upgrading, with high products quality and reasonable prices, the products sell well in more than 60 countries and regions, such as the Middle-East, Southeast Asia, South Asia, Europe, U.S.A, Africa, etc. Win the customer's wide welcome and trust.
The company has a high-quality QC team, in a rigorous, serious and responsible attitude, check the quality and ensure that each sheet is qualified.
We will serve you with the greatest enthusiasm, the most professional attitude, give you the most satisfied customer experience.
We are expecting to establish the mutual benefit business relationship with you.
Quality Requirements for Film Faced Plywood
Film Faced Shuttering Plywood is cost effective and a super finisher.
In total it saves over 40 percent in finishing costs, which is a boom for construction industry.
Poplar throughout plywood, overlaid with film to provide a tough, durable finish. Available in smooth two-side for construction formwork or a film wire mesh pattern with slip resistant for vehicle and trailer boxes. Phenolic resin impregnated film is pressed to both surfaces of the panel under high pressure and temperature. All the edges are sealed to minimise moisture penetration. Film faced panels have improved resistance to abrasion, chemicals, insects and fungi. Due to its durability and easily handled surface it can be used in open environment in construction and building e.g. warehouses, railway wagons, floors and sidewalls of trucks etc.
We can offer you such film faced plywood with size:1220mm×2440mm, 1250X2500mm, 915X1830mm, 610X2440mm, etc.
1. To ensure the products to meet the quality standards
2. To ensure the goods to be inspected piece by peice and delivered on time.
3. To provide warm and friendly service and after-sales service.
4. To reply you within 4 hours at the latest.
5. To guarantee the reliable quality and professional service,you will find that importing directly from us Eoncred is so easy and simple as you buy from local supplier.
▼FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
| High Quality Finger Joint Core Structural Film Faced Plywood | |
▼OUR PRODUCT
1. Planking → 2. Molding → 3. Prepressing → 4. Hot-pressing → 5. Deal Surface → 6. Sanding → 7. Laminated with Hot-pressing → 8. Sawing → 9. Checking (one by one) → 10. Printing (waterproof edge) → 11. Inter package →12. Outer package
▼OUR COMPANY
Linyi YIRUIDE Wood Co., Ltd, is a subsidiary of Eoncred Group, established in 1995, located in China’s largest wooden products manufacture base - Linyi city, have 3 factories, totally covered an area of 20000 square meters, with more than 200 employees.
Company focus on the production of Plywood, Film Faced Plywood, Fancy Plywood.
After decades of developing and upgrading, with high products quality and reasonable prices, the products sell well in more than 60 countries and regions, such as the Middle-East, Southeast Asia, South Asia, Europe, U.S.A, Africa, etc. Win the customer's wide welcome and trust.
The company has a high-quality QC team, in a rigorous, serious and responsible attitude, check the quality and ensure that each sheet is qualified.
We will serve you with the greatest enthusiasm, the most professional attitude, give you the most satisfied customer experience.
We are expecting to establish the mutual benefit business relationship with you.
Quality Requirements for Film Faced Plywood
Film Faced Shuttering Plywood is cost effective and a super finisher.
In total it saves over 40 percent in finishing costs, which is a boom for construction industry.
Poplar throughout plywood, overlaid with film to provide a tough, durable finish. Available in smooth two-side for construction formwork or a film wire mesh pattern with slip resistant for vehicle and trailer boxes. Phenolic resin impregnated film is pressed to both surfaces of the panel under high pressure and temperature. All the edges are sealed to minimise moisture penetration. Film faced panels have improved resistance to abrasion, chemicals, insects and fungi. Due to its durability and easily handled surface it can be used in open environment in construction and building e.g. warehouses, railway wagons, floors and sidewalls of trucks etc.
We can offer you such film faced plywood with size:1220mm×2440mm, 1250X2500mm, 915X1830mm, 610X2440mm, etc.
1. To ensure the products to meet the quality standards
2. To ensure the goods to be inspected piece by peice and delivered on time.
3. To provide warm and friendly service and after-sales service.
4. To reply you within 4 hours at the latest.
5. To guarantee the reliable quality and professional service,you will find that importing directly from us Eoncred is so easy and simple as you buy from local supplier.
▼FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
