Home / Products / Laminated Board / Laminated Plywood / Double Face Laminated Melamine Laminated Marine Plywood for Sale
English
 |
| Quantity: | |
|---|---|
1220*2440*1.6-25mm Stardard Size
Eoncred
4412310090
| Double Face Laminated Melamine Laminated Marine Plywood for Sale | |
| 1.6mm-25mm | |
| One side or two sides | |
white laminated plywood sheets
1.Planking→ 2.Molding→ 3.Prepressing→ 4. Hot-pressing→ 5.Deal Surface →6.Sanding→ 7.Veneering→ 8.Hot-pressing→ 9.Sawing→ 10. Polishing→ 11.Checking→ 12.Outer Package
▼PACKING&SHIPPING
▼OUR COMPANY
Linyi YIRUIDE Wood Co., Ltd, is a subsidiary of Eoncred Group, established in 1995, located in China’s largest wooden products manufacture base - Linyi city, have 3 factories, totally covered an area of 20000 square meters, with more than 200 employees.
Company focus on the production of Plywood, Film Faced Plywood, Fancy Plywood.
After decades of developing and upgrading, with high products quality and reasonable prices, the products sell well in more than 60 countries and regions, such as the Middle-East, Southeast Asia, South Asia, Europe, U.S.A, Africa, etc. Win the customer's wide welcome and trust.
The company has a high-quality QC team, in a rigorous, serious and responsible attitude, check the quality and ensure that each sheet is qualified.
We will serve you with the greatest enthusiasm, the most professional attitude, give you the most satisfied customer experience.
We are expecting to establish the mutual benefit business relationship with you.
Maybe you have used laminated plywood for a while, but you want to make it look more beautiful, you can take it off and paint it, which is the same effect.
First remove the laminated plywood with a screwdriver to work more efficiently. If there is some decoration on the laminated plywood, you can also remove the decoration first to better paint for him.
laminated plywood needs to remove surface dust and then wipe it with a damp cloth or a soft sponge. Make sure that the laminated plywood should be dry before you continue working. Then use rough grit sandpaper and sander to remove the old paint. If there are holes in the laminated plywood, add them with wood putty. Before the compound begins to harden, the putty is inserted into the hole with a putty knife and leveled with a putty knife. Most wood putty products harden in 20 minutes. Allow the putty to dry completely for up to 12 hours.
Use rough sandpaper again after finishing the previous work to eliminate any excess wood putty and even the primer on the surface. Apply the first primer, completely dry, sand with sandpaper, and apply a second primer. Usually, two layers of primer are sufficient for the laminated plywood. The final primer after the primer is completely dry. Start with a top corner and apply the first layer of paint. Use a smaller paint roller if you want to avoid visible brush strokes. Use a small brush to cover areas that you can't reach with the roller. Let the laminated plywood dry overnight. After the paint is completely dry, use a screwdriver to reinstall the laminated plywood.
After painting, look at your laminated plywood, is it more integrated with your style? You can also freely combine various paint methods.
1. To ensure the products to meet the quality standards
2. To ensure the goods to be inspected piece by peice and delivered on time.
3. To provide warm and friendly service and after-sales service.
4. To reply you within 4 hours at the latest.
5. To guarantee the reliable quality and professional service,you will find that importing directly from us Eoncred is so easy and simple as you buy from local supplier.
▼FAQ
Q: Are you trading company or manufacturer ?
A: We are the professional factory specialized in MDF,Plywood,Film Faced Plywood,and Veneer,etc.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
| Double Face Laminated Melamine Laminated Marine Plywood for Sale | |
| 1.6mm-25mm | |
| One side or two sides | |
white laminated plywood sheets
1.Planking→ 2.Molding→ 3.Prepressing→ 4. Hot-pressing→ 5.Deal Surface →6.Sanding→ 7.Veneering→ 8.Hot-pressing→ 9.Sawing→ 10. Polishing→ 11.Checking→ 12.Outer Package
▼PACKING&SHIPPING
▼OUR COMPANY
Linyi YIRUIDE Wood Co., Ltd, is a subsidiary of Eoncred Group, established in 1995, located in China’s largest wooden products manufacture base - Linyi city, have 3 factories, totally covered an area of 20000 square meters, with more than 200 employees.
Company focus on the production of Plywood, Film Faced Plywood, Fancy Plywood.
After decades of developing and upgrading, with high products quality and reasonable prices, the products sell well in more than 60 countries and regions, such as the Middle-East, Southeast Asia, South Asia, Europe, U.S.A, Africa, etc. Win the customer's wide welcome and trust.
The company has a high-quality QC team, in a rigorous, serious and responsible attitude, check the quality and ensure that each sheet is qualified.
We will serve you with the greatest enthusiasm, the most professional attitude, give you the most satisfied customer experience.
We are expecting to establish the mutual benefit business relationship with you.
Maybe you have used laminated plywood for a while, but you want to make it look more beautiful, you can take it off and paint it, which is the same effect.
First remove the laminated plywood with a screwdriver to work more efficiently. If there is some decoration on the laminated plywood, you can also remove the decoration first to better paint for him.
laminated plywood needs to remove surface dust and then wipe it with a damp cloth or a soft sponge. Make sure that the laminated plywood should be dry before you continue working. Then use rough grit sandpaper and sander to remove the old paint. If there are holes in the laminated plywood, add them with wood putty. Before the compound begins to harden, the putty is inserted into the hole with a putty knife and leveled with a putty knife. Most wood putty products harden in 20 minutes. Allow the putty to dry completely for up to 12 hours.
Use rough sandpaper again after finishing the previous work to eliminate any excess wood putty and even the primer on the surface. Apply the first primer, completely dry, sand with sandpaper, and apply a second primer. Usually, two layers of primer are sufficient for the laminated plywood. The final primer after the primer is completely dry. Start with a top corner and apply the first layer of paint. Use a smaller paint roller if you want to avoid visible brush strokes. Use a small brush to cover areas that you can't reach with the roller. Let the laminated plywood dry overnight. After the paint is completely dry, use a screwdriver to reinstall the laminated plywood.
After painting, look at your laminated plywood, is it more integrated with your style? You can also freely combine various paint methods.
1. To ensure the products to meet the quality standards
2. To ensure the goods to be inspected piece by peice and delivered on time.
3. To provide warm and friendly service and after-sales service.
4. To reply you within 4 hours at the latest.
5. To guarantee the reliable quality and professional service,you will find that importing directly from us Eoncred is so easy and simple as you buy from local supplier.
▼FAQ
Q: Are you trading company or manufacturer ?
A: We are the professional factory specialized in MDF,Plywood,Film Faced Plywood,and Veneer,etc.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
