English
 |
| Quantity: | |
|---|---|
1220*2440*1.6-25mm Stardard Size
Eoncred
4412310090
| China Good Price Laminated Block Board 18mm | |
| 1.6mm-25mm | |
| One side or two sides | |
white laminated plywood sheets
1.Planking→ 2.Molding→ 3.Prepressing→ 4. Hot-pressing→ 5.Deal Surface →6.Sanding→ 7.Veneering→ 8.Hot-pressing→ 9.Sawing→ 10. Polishing→ 11.Checking→ 12.Outer Package
▼PACKING&SHIPPING
▼OUR COMPANY
Linyi YIRUIDE Wood Co., Ltd, is a subsidiary of Eoncred Group, established in 1995, located in China’s largest wooden products manufacture base - Linyi city, have 3 factories, totally covered an area of 20000 square meters, with more than 200 employees.
Company focus on the production of Plywood, Film Faced Plywood, Fancy Plywood.
After decades of developing and upgrading, with high products quality and reasonable prices, the products sell well in more than 60 countries and regions, such as the Middle-East, Southeast Asia, South Asia, Europe, U.S.A, Africa, etc. Win the customer's wide welcome and trust.
The company has a high-quality QC team, in a rigorous, serious and responsible attitude, check the quality and ensure that each sheet is qualified.
We will serve you with the greatest enthusiasm, the most professional attitude, give you the most satisfied customer experience.
We are expecting to establish the mutual benefit business relationship with you.
Type of laminated plywood
In order to make full and effective use of forest resources to develop plywood production and the best use of materials, China's new national standard (draft report) is divided into decorative plywood. Panels coated with clear paint (based on surface requirements). Coated furniture), sewing machines and tables of various electrical boxes, etc.), decorative plywood (building, furniture, vehicle and ship decoration materials), plywood (for packaging, filling and other uses) and veneer plywood (building, furniture ) As a high-quality finish for automobiles, ships, etc., the plywood type can be further subdivided by adhesion:
(1) Class I (NQF) - weather resistant, boiling water resistant plywood. This type
Plywood is durable, resistant to boiling or steaming and can be used outdoors.
(2) Class II (Ns) - water resistant plywood.
It can withstand cold water or short-term hot water impregnation, but is not resistant to boiling.
(3) Class III (Nc) - non-durable plywood.
Laminated plywood application
Plywood is one of the most common facing materials. It is one of three wooden boards. It can also be used for airplanes, ships, trains, cars, buildings and boxes. Generally, the veneers are vertically bonded in the direction of the texture of adjacent layers. Usually, the front panel and the inner panel are symmetrical on both sides of the middle layer or core. The veneer obtained from the veneer laminated on the wood particles is heated or pressurized without heating. The number of layers is usually odd and even. The difference in physical and mechanical properties between longitudinal and lateral directions is small. General plywood is plywood, plywood, etc. Plywood can improve the use of wood and is the main method of saving wood. The general requirements for length and width are 1220 × 2440 mm. General thickness requirements: 3, 5, 9, 12, 15, 18 mm, etc. The main wood types are eucalyptus, hawthorn and willow. Poplar, elm, etc.
1. To ensure the products to meet the quality standards
2. To ensure the goods to be inspected piece by peice and delivered on time.
3. To provide warm and friendly service and after-sales service.
4. To reply you within 4 hours at the latest.
5. To guarantee the reliable quality and professional service,you will find that importing directly from us Eoncred is so easy and simple as you buy from local supplier.
▼FAQ
Q: Are you trading company or manufacturer ?
A: We are the professional factory specialized in MDF,Plywood,Film Faced Plywood,and Veneer,etc.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
| China Good Price Laminated Block Board 18mm | |
| 1.6mm-25mm | |
| One side or two sides | |
white laminated plywood sheets
1.Planking→ 2.Molding→ 3.Prepressing→ 4. Hot-pressing→ 5.Deal Surface →6.Sanding→ 7.Veneering→ 8.Hot-pressing→ 9.Sawing→ 10. Polishing→ 11.Checking→ 12.Outer Package
▼PACKING&SHIPPING
▼OUR COMPANY
Linyi YIRUIDE Wood Co., Ltd, is a subsidiary of Eoncred Group, established in 1995, located in China’s largest wooden products manufacture base - Linyi city, have 3 factories, totally covered an area of 20000 square meters, with more than 200 employees.
Company focus on the production of Plywood, Film Faced Plywood, Fancy Plywood.
After decades of developing and upgrading, with high products quality and reasonable prices, the products sell well in more than 60 countries and regions, such as the Middle-East, Southeast Asia, South Asia, Europe, U.S.A, Africa, etc. Win the customer's wide welcome and trust.
The company has a high-quality QC team, in a rigorous, serious and responsible attitude, check the quality and ensure that each sheet is qualified.
We will serve you with the greatest enthusiasm, the most professional attitude, give you the most satisfied customer experience.
We are expecting to establish the mutual benefit business relationship with you.
Type of laminated plywood
In order to make full and effective use of forest resources to develop plywood production and the best use of materials, China's new national standard (draft report) is divided into decorative plywood. Panels coated with clear paint (based on surface requirements). Coated furniture), sewing machines and tables of various electrical boxes, etc.), decorative plywood (building, furniture, vehicle and ship decoration materials), plywood (for packaging, filling and other uses) and veneer plywood (building, furniture ) As a high-quality finish for automobiles, ships, etc., the plywood type can be further subdivided by adhesion:
(1) Class I (NQF) - weather resistant, boiling water resistant plywood. This type
Plywood is durable, resistant to boiling or steaming and can be used outdoors.
(2) Class II (Ns) - water resistant plywood.
It can withstand cold water or short-term hot water impregnation, but is not resistant to boiling.
(3) Class III (Nc) - non-durable plywood.
Laminated plywood application
Plywood is one of the most common facing materials. It is one of three wooden boards. It can also be used for airplanes, ships, trains, cars, buildings and boxes. Generally, the veneers are vertically bonded in the direction of the texture of adjacent layers. Usually, the front panel and the inner panel are symmetrical on both sides of the middle layer or core. The veneer obtained from the veneer laminated on the wood particles is heated or pressurized without heating. The number of layers is usually odd and even. The difference in physical and mechanical properties between longitudinal and lateral directions is small. General plywood is plywood, plywood, etc. Plywood can improve the use of wood and is the main method of saving wood. The general requirements for length and width are 1220 × 2440 mm. General thickness requirements: 3, 5, 9, 12, 15, 18 mm, etc. The main wood types are eucalyptus, hawthorn and willow. Poplar, elm, etc.
1. To ensure the products to meet the quality standards
2. To ensure the goods to be inspected piece by peice and delivered on time.
3. To provide warm and friendly service and after-sales service.
4. To reply you within 4 hours at the latest.
5. To guarantee the reliable quality and professional service,you will find that importing directly from us Eoncred is so easy and simple as you buy from local supplier.
▼FAQ
Q: Are you trading company or manufacturer ?
A: We are the professional factory specialized in MDF,Plywood,Film Faced Plywood,and Veneer,etc.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
