English
 |
| Quantity: | |
|---|---|
1220*2440*2-6mm Stardard Size
Eoncred
4411121900
| 6.0mm Thin MDF Board for Indoor Furniture Decoration | |
| 2.0mm-6.0mm | |
| Double face well sanded | |
1.Raw Material 2. Chipping 3. Refining fiber & Drying & Gluing 4. Forming 5. Hot Press 6. Cooling 7.Trim Saw 8. Sanding 9. Packing & Shipping
▼PACKING&SHIPPING
▼OUR COMPANY
Eoncred Wood Co., Ltd is a subsidiary of Eoncred Group, established in 2010, located in China’s largest wood board production base-Linyi, head office located in the sea port city-Qingdao.
Company focus on the production of MDF, Slot MDF, Laminated Board, Particle Board, OSB.
After decade years developing and upgrading, with high products quality and reasonable prices, the products sell well in more than 60 countries and regions, such as the Middle-East, Southeast Asia, South Asia, Europe, U.S.A, Africa,etc. Win the customer's wide welcome and trust.
The company has a high-quality QC team, in a rigorous, serious and responsible attitude, check the quality and ensure that each sheet is qualified.
We will serve you with the greatest enthusiasm, the most professional attitude, give you the most satisfied customer experience.
We are expecting to establish the mutual benefit business relationship with you.
What material is MDF
Density board (English: High Density Board (wood)), also known as fiberboard, is a man-made board made of wood materials such as trunk wood, branch wood, or other plant fibers through heat grinding, sizing, drying, and paving. , Adhesive mainly uses urea-formaldehyde glue. It is soft and impact resistant, with high strength, uniform density after pressing, and easy to reprocess. It is widely used in many fields in my country, but its disadvantage is poor waterproofness, which also limits its scope of use to a certain extent .
Types of MDF
We usually classify fiberboard into four categories according to its density:
Lightweight fiberboard: nominal density is less than or equal to 0.45g/cm⊃3;
Low density fiberboard: nominal density is 0.45g/cm⊃3;～0.65g/cm⊃3;
Medium density fiberboard: nominal density is 0.65g/cm⊃3;～0.80g/cm⊃3;
High-density fiberboard: the nominal density is greater than 0.80g/cm⊃3;
Features of MDF
The surface of the density board is smooth and flat, the material is fine, the performance is stable, the edge is firm, and the surface of the board is well decorated. However, MDF has poor moisture resistance. In contrast, MDF has a weaker nail-holding power than particleboard. If the screws are loosened after tightening, it is difficult to fix the MDF because of its low strength.
Advantages of MDF
1. The density board is easy to be painted. Various coatings and paints can be evenly coated on the density board, which is the first choice for the paint effect.
2. Density board is also a beautiful decorative board.
3. All kinds of wood veneer, adhesive paper film, veneer, light metal sheet, melamine board and other materials can be glued on the surface of density board.
4. After punching and drilling, the rigid density board can also be made into sound-absorbing board, which can be used in architectural decoration engineering.
5. Excellent physical properties, uniform material, no dehydration problem.
1. To ensure the products to meet the quality standards
2. To ensure the goods to be inspected piece by peice and delivered on time.
3. To provide warm and friendly service and after-sales service.
4. To reply you within 4 hours at the latest.
5. To guarantee the reliable quality and professional service,you will find that importing directly from us Eoncred is so easy and simple as you buy from local supplier.
▼FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q How can we ensure the quality ?
A：
1) Only qualified raw material with certification is acceptable.
2) Quality check is operated by hand.
3) Free samples are always available.
4) Once quality problems occur, just sent us pics for confirmation, once confirmed, money or goods will be given as compensation.
| 6.0mm Thin MDF Board for Indoor Furniture Decoration | |
| 2.0mm-6.0mm | |
| Double face well sanded | |
1.Raw Material 2. Chipping 3. Refining fiber & Drying & Gluing 4. Forming 5. Hot Press 6. Cooling 7.Trim Saw 8. Sanding 9. Packing & Shipping
▼PACKING&SHIPPING
▼OUR COMPANY
Eoncred Wood Co., Ltd is a subsidiary of Eoncred Group, established in 2010, located in China’s largest wood board production base-Linyi, head office located in the sea port city-Qingdao.
Company focus on the production of MDF, Slot MDF, Laminated Board, Particle Board, OSB.
After decade years developing and upgrading, with high products quality and reasonable prices, the products sell well in more than 60 countries and regions, such as the Middle-East, Southeast Asia, South Asia, Europe, U.S.A, Africa,etc. Win the customer's wide welcome and trust.
The company has a high-quality QC team, in a rigorous, serious and responsible attitude, check the quality and ensure that each sheet is qualified.
We will serve you with the greatest enthusiasm, the most professional attitude, give you the most satisfied customer experience.
We are expecting to establish the mutual benefit business relationship with you.
What material is MDF
Density board (English: High Density Board (wood)), also known as fiberboard, is a man-made board made of wood materials such as trunk wood, branch wood, or other plant fibers through heat grinding, sizing, drying, and paving. , Adhesive mainly uses urea-formaldehyde glue. It is soft and impact resistant, with high strength, uniform density after pressing, and easy to reprocess. It is widely used in many fields in my country, but its disadvantage is poor waterproofness, which also limits its scope of use to a certain extent .
Types of MDF
We usually classify fiberboard into four categories according to its density:
Lightweight fiberboard: nominal density is less than or equal to 0.45g/cm⊃3;
Low density fiberboard: nominal density is 0.45g/cm⊃3;～0.65g/cm⊃3;
Medium density fiberboard: nominal density is 0.65g/cm⊃3;～0.80g/cm⊃3;
High-density fiberboard: the nominal density is greater than 0.80g/cm⊃3;
Features of MDF
The surface of the density board is smooth and flat, the material is fine, the performance is stable, the edge is firm, and the surface of the board is well decorated. However, MDF has poor moisture resistance. In contrast, MDF has a weaker nail-holding power than particleboard. If the screws are loosened after tightening, it is difficult to fix the MDF because of its low strength.
Advantages of MDF
1. The density board is easy to be painted. Various coatings and paints can be evenly coated on the density board, which is the first choice for the paint effect.
2. Density board is also a beautiful decorative board.
3. All kinds of wood veneer, adhesive paper film, veneer, light metal sheet, melamine board and other materials can be glued on the surface of density board.
4. After punching and drilling, the rigid density board can also be made into sound-absorbing board, which can be used in architectural decoration engineering.
5. Excellent physical properties, uniform material, no dehydration problem.
1. To ensure the products to meet the quality standards
2. To ensure the goods to be inspected piece by peice and delivered on time.
3. To provide warm and friendly service and after-sales service.
4. To reply you within 4 hours at the latest.
5. To guarantee the reliable quality and professional service,you will find that importing directly from us Eoncred is so easy and simple as you buy from local supplier.
▼FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q How can we ensure the quality ?
A：
1) Only qualified raw material with certification is acceptable.
2) Quality check is operated by hand.
3) Free samples are always available.
4) Once quality problems occur, just sent us pics for confirmation, once confirmed, money or goods will be given as compensation.
